English
中文
Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
Βρέθηκε 66 αποτελέσματα για "
250v differential pressure switch
"
IP54 Ρυθμίσιμος συμπυκνωτής αέρα, αισθητήρας αλλαγής πίεσης από ανοξείδωτο χάλυβα
IP54 White Stainless Steel Pressure Switch For Air And Liquid Description The pressure switch is a simple pressure control device, when the measured pressure reaches the rated value, the electronic pressure switch can issue an alarm or control signal. The working principle of the pressure switch: when the pressure in the system is higher or lower than the rated safety pressure, the disc in the sensor moves instantaneously, and the switch connector is pushed on or off through
Διπλοί διευθετήσιμοι διακόπτες πίεσης ανοξείδωτου για την υδραντλία
Dual adjustable pressure switches pressure switch water pump Description The working principle of the pressure switch: when the pressure in the system is higher or lower than the rated safety pressure, the disc in the sensor will move instantaneously, and the switch connector will be connected or disconnected by connecting the guide rod. When the pressure drops to or rises to the rated recovery value, the disc will reset instantaneously, and the switch will reset automaticall
-0,5~3bar SPDT Κρασελίδες ρυθμιζόμενης πίεσης από χαλκό
-0.5~3bar SPDT brass adjustable pressure switches Description The pressure switch is a device combined with an electrical switch. When the preset fluid pressure is reached, the switch contact will act. It is mainly used in power plants, petrochemicals, metallurgical industries and other industrial equipment to output alarm or control signals. The Q series pressure switch can monitor the pressure of liquid or gas at a temperature of -20~120°C, and respond to the change of
Brass Connection Dual Pressure Switch Hvac Πιστοποιημένος CE
CE brass connection dual pressure switch Description What is a dual pressure switch? Dual Pressure Switch. Dual pressure switches are to be used in refrigeration and air-conditioning systems to provide protection against overly low suction pressure or overly high discharge pressure. The controls are also used for beginning and stopping refrigeration compressors and fans on air- cooled condensers. Q830 series dual pressure controls can be not only used in fluorinated
SPDT Διακόπτης διπλής πίεσης για έλεγχο αέρα ή υγρού
SPDT dual pressure switch for controlling air or liquid Description What is the two pressure used in pressure switch? There are two main types of pressure switches: mechanical pressure and electronic pressure switches. A mechanical pressure switch has a mechanical pressure-sensing part that deforms according to the fluid pressure. Q830 series dual pressure controls can be not only used in fluorinated refrigerant, but also in the air and liquid (allowed liquid temp. -20 to 120
Ο διπλός διακόπτης πίεσης για το συμπιεστή HVAC/R, αυτοκίνητο χαμηλής πίεσης ρυθμίζει
Dual Pressure Switch for HVAC/R Compressor, Low Pressure Auto Adjust Description Where should a pressure switch be installed? Except for special installations such as constant pressure water pump systems in-well systems that do not use a conventional water pressure tank or water storage tank, the pressure control switch should be located as close to the pressure tank as possible. Q830 series dual pressure controls can be not only used in fluorinated refrigerant, but also in
Δύο διακόπτες πίεσης της σειράς Q830
IP44 Adjustable Pressure Switches Protecting Pump Compressor CE Approval Description KPS series dual pressure controls can be not only used in fluorinated refrigerant, but also in the air and liquid (allowed liquid temp. -20 to 120°C) Adjustable range and differential settings. Renovated SPDT micro-switch ensures the reliable switch function. Flexible mounting bracket suits various kids of application. Upper lid is optional (IP44) Various connections are available on request.
-0,5~3bar Ρυθμίσιμοι διακόπτες πίεσης για αντλίες
-0.5~3bar adjustable pressure switches for pumps Description In the mechanical system, the air bag interface of the controller is connected to the pressure port. When the pressure in the mechanical system exceeds the pressure set point of the controller, the contacts of the microswitch of the controller are opened, and the circuit is cut off or connected, and the machine stops or starts the operation. When the pressure in the mechanical system drops to the set value of the
